ELITE 2000U Smart
Line interactive UPS

Overview

  • Built-in AVR 
  • Overload protection 
  • Overcharge protection 
  • Short circuit protection 
  • Wide input voltage range 
  • Compatible with generators 
  • Battery deep discharge protection 

Specifications

Input 
Capacity  2000VA/1200W
Voltage Range (220V)  140~300VAC
Frequency  50/60Hz (Auto sensing)
Phase  Single phase 
Socket With Fuse
Cold Start Press the ON/OFF switch (0%~100% load)
Output 
Rating Capacity 2000VA
Rating Power 1200W
Waveform Waveform Battery mode (Simulated Sinewave) AC mode (Sinewave)
Power Factor 0.6
Rating Voltage 220VAC 
AC Voltage Regulation ±10% (Battery mode)
Rear Output Socket 4 x Universal (Battery backup)
Output Frequency 
Rating Frequency 50/60Hz±1Hz
Line Mode Synchronize with the utility
Environment 
Tempreature 0˚C~40˚C
Humidity 0%~90%RH (Non-condensing)
Noise Level Less than 45dB
Indicators 
AC Mode Green lighting
Battery Mode Yellow flashing
Fault  Red lighting
Physical 
Dimensions (WxDxH) (mm) 390 x 125 x 225 
Net Weight (kg)  13.4±0.3
Transfer Time Typical 2~6ms (Max 10ms)
Communication Interface USB/RJ11 (Optional)
Battery & Runtime
Rating Voltage 12V/9AH x 2
Recharge Time 6-8 hrs recover to 90% capacity
Change Current About 1A at Normal mode
Short Circuit Protection
Line Mode Fuse & firmware protection
Battery Mode Firmware protection
Overload Protection
Line Mode Load<110%±5% go to fault mode after 5 mins
Load<120%±5% go to fault mode immediately
Battery Mode Load<110%±5% shut down after 5 secs
Load<120%±5% shut down immediately
Protection 
Full Protection Overload, discharge & overcharge protection
Alarm 
Battery Mode Sounding every 10 secs 
Low Battery Sounding every sec 
Overload Sounding every 0.5 sec
Fault  Continuously sounding
Management 
Compatible with OS Supports Windows® 2000/2003/XP/Vista/2008/7/8.1/10
×

© 2024   |   Terms & Conditions   |   Privacy Policy   |   Site Map